OH - LV - Clamp - ABC Anchoring - PINCE-OCTOx

OH - LV - Clamp - ABC Anchoring - PINCE-OCTOx

Anchor clamp PINCE-OCTOx for overhead line is designed to anchor insulated service lines with 2 or 4 conductors to the pole or wall. The anchor clamp is composed of a body, wedges and removable and adjustable bail or pad. One core Anchor clamps are design to supporting the neutral messenger, the wedge can be self-adjusting. Pilot wires or street lighting conductor are led alongside the clamp. The self-opening is featured by an integrate spring facilities for easily insert the conductor into the clamp. The clamp body, the main mechanical component is manufactured in heavy duty weatherproof synthetic material. The wedge, made from synthetic material exerts necessary mechanical pressure in retaining the cable in the body of the clamp. The pull hook is made from anti corrosion rod. For anchoring isolated coaxial and unipolar cables. It is a kind of overhead power accessories and it's used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor. The advantage of it is easy installation, safe use and cheap.

CATALOG INFORMATION

Share it:

Specifications

MATERIALS

Clamping Plates: Galvanized steel.
Wedges: UV and weather resistant, high strength engineering-plastic.
Bolts: Galvanized steel.

FEATURES AND BENEFITS

PINCE-OCTOx can support the load of the accommodated cable size according to EN 50483 standards.

PINCE-OCTOx can accommodate various cable sizes and doesn't have any parts that can be lost, making inventory management simpler.

The spring mounting allows for easy insertion of cables by separating the wedges.

PINCE-OCTOx can withstand harsh conditions, leading to a longer lifespan, improved safety, lower maintenance needs, and reduced lifetime costs.

INSTALLATION GUILDELINES

Step 1: Unscrew the nuts of PINCE-OCTOx
Step 2: Spreading the A.B.C and insert each conductor into each channel of PINCE-OCTOx
Step 3: Screw the nuts carefully.
Step 4: Anchor the clamp on a hook.
Step 5: Additional tightening is achieved automatically by the cleats

CONDUCTOR CROSS-SECTION’S APPLICATION

PRODUCT CODE	CROSS-SECTION
PRODUCT CODE	MINIMUM (mm²)	MAXIMUM (mm²)
PINCE-OCTO2-1025	10	25
PINCE-OCTO2-2550	25	50
PINCE-OCTO2-70120	70	120
PINCE-OCTO2-150240	150	240
PINCE-OCTO3-2550	25	50
PINCE-OCTO3-70120	70	120
PINCE-OCTO3-150240	150	240

*Note: The products can be improved or modified based on specified requests of different market. The letter “x” shall be replaced to “2” for “2 bolted type and “3” for “3 bolted- type”

HOLDING STRENGTH

PRODUCT CODE	HOLDING STRENGTH (kN)
PINCE-OCTO2-1025	> 4,80
PINCE-OCTO2-2550	> 5,60
PINCE-OCTO2-70120	> 13,44
PINCE-OCTO2-150240	> 18,50
PINCE-OCTO3-2550	> 5,60
PINCE-OCTO3-70120	> 13,44
PINCE-OCTO3-150240	> 18,50

FAILING LOAD STRENGTH

PRODUCT CODE	HOLDING STRENGTH (kN)
PINCE-OCTO2-1025	> 11,90
PINCE-OCTO2-2550	> 23,80
PINCE-OCTO2-70120	> 57,10
PINCE-OCTO2-150240	> 92,80
PINCE-OCTO3-2550	> 23,80
PINCE-OCTO3-70120	> 57,10
PINCE-OCTO3-150240	> 92,80

DIELECTRIC STRENGTH

PRODUCT CODE	WITHSTANDING CAPACITY (kV)
PINCE-OCTO2-1025	4,00
PINCE-OCTO2-2550	4,00
PINCE-OCTO2-70120	4,00
PINCE-OCTO2-150240	4,00
PINCE-OCTO3-2550	4,00
PINCE-OCTO3-70120	4,00
PINCE-OCTO3-150240	4,00

SAFETY CONSIDERATION

This product is intended for use by trained craftspeople only. This product SHOULD NOT BE USED by anyone who is not familiar with and trained in the use of it.
When working in the area of energized lines with this product, EXTRA CARE should be taken to prevent accidental electrical contact.
For PROPER PERFORMANCE and PERSONAL SAFETY be sure to select the proper size EMAAR product before application.
EMAAR products are precision devices. To insure proper performance, they should be stored in cartons under cover and handled carefully.