OH - MV - Clamp - PINCE-H

The compression clamp PINCE-H is categorized as a splicing fitting and is commonly utilized for the connection of various types of bare conductors and lighting conductors. The compression tap connector is subject to the same electrical load as the conductors. The majority of splicing fittings are designed to support the tension of conductors, ground wires, and lighting conductors. Based on the tensile condition, splicing fittings are categorized into force bearing and non-force-bearing types. Splicing fittings are typically categorized as compression type and preformed type. Our compression methods encompass hydraulic compression, explosive compression, and compression using pliers. In general, malleable cast iron, steel, copper, copper alloy, and aluminum alloy are commonly utilized as materials for this purpose.

CATALOG INFORMATION

Share it:

Specifications

CONDUCTOR CROSS-SECTION’S APPLICATION

*Note: The products can be improved or modified based on specified requests of different market.

For the case of adding stirrup, please add “S” at the end of each code. For example: PINCE-H-3535S

ALUMINUM & COPPER CONDUCTOR DIAMETER

*Note: The products can be improved or modified based on specified requests of different market.

For the case of adding stirrup, please add “S” at the end of each code. For example: PINCE-H-3535S

SHORT CIRCUIT CAPACITY TO COPPER CONDUCTOR

PRODUCT CODE	RESULTS (kA/2s)
PINCE-H-3535	3,64
PINCE-H-5050	5,20
PINCE-H-7050	7,28
PINCE-H-7070	7,28
PINCE-H-9550	5,20
PINCE-H-9570	7,28
PINCE-H-9595	9,88
PINCE-H-24050	5,20
PINCE-H-24095	9,88
PINCE-H-240150	15,60
PINCE-H-240240	24,96

*Note: The products can be improved or modified based on specified requests of different market.

For the case of adding stirrup, please add “S” at the end of each code. For example: PINCE-H-3535S

SHORT CIRCUIT CAPACITY TO ALUMINUM CONDUCTOR

PRODUCT CODE	RESULTS (kA/2s)
PINCE-H-3535	2,17
PINCE-H-5050	3,10
PINCE-H-7050	4,34
PINCE-H-7070	4,34
PINCE-H-9550	3,10
PINCE-H-9570	4,34
PINCE-H-9595	5,90
PINCE-H-24050	3,10
PINCE-H-24095	5,90
PINCE-H-240150	9,30
PINCE-H-240240	14,90

*Note: The products can be improved or modified based on specified requests of different market.

For the case of adding stirrup, please add “S” at the end of each code. For example: PINCE-H-3535S

NORMAL WORKING TEMPERATURE

PRODUCT CODE	RESULTS (ºC)
PINCE-H-3535	< 80
PINCE-H-5050	< 80
PINCE-H-7050	< 80
PINCE-H-7070	< 80
PINCE-H-9550	< 80
PINCE-H-9570	< 80
PINCE-H-9595	< 80
PINCE-H-24050	< 80
PINCE-H-24095	< 80
PINCE-H-240150	< 80
PINCE-H-240240	< 80

*Note: The products can be improved or modified based on specified requests of different market.

For the case of adding stirrup, please add “S” at the end of each code. For example: PINCE-H-3535S

PRODUCT CODES EQUIVALENT

CROSS-SECTION (mm²)	PRODUCT CODES
CROSS-SECTION (mm²)	EMAAR	THOMAS AND BETT
10-35(50)/10-35(50)	PINCE-H-3535	WR189
25–50(70)/25–50(70)	PINCE-H-5050	WR259
50–70/25–50(70)	PINCE-H-7050	WR269
50–70/50–70	PINCE-H-7070	WR279/WR289
70–95/25–50(70)	PINCE-H-9550	WR379
70–95/50–70	PINCE-H-9570	WR399
70–95/70–95	PINCE-H-9595	WR419
120–240/25–50(70)	PINCE-H-24050	WR815
120–240/70–95	PINCE-H-24095	WR835
120–240/95–150	PINCE-H-240150	WR875
150–240/150–240	PINCE-H-240240	WR929

SAFETY CONSIDERATION

This product is intended for use by trained craftspeople only. This product SHOULD NOT BE USED by anyone who is not familiar with and trained in the use of it.
When working in the area of energized lines with this product, EXTRA CARE should be taken to prevent accidental electrical contact.
For PROPER PERFORMANCE and PERSONAL SAFETY be sure to select the proper size EMAAR product before application.
EMAAR products are precision devices. To insure proper performance, they should be stored in cartons under cover and handled carefully.